The Basics of Tree Cutting

Tree Cutting is the process of cutting a tree or portion of a tree for maintenance, aesthetics, or safety. This service is also known as tree trimming, or tree pruning, and is essential for the health of trees, promoting their growth, reducing risks, and ensuring the safety of property and people.

The best time to cut a tree is during the dry season, when the wood is harder and easier to work with. However, tree cutting can be done all year round depending on the need and environment. This service may be required in the case of a storm damage or when trees are showing signs of dying.

There are several important safety considerations to keep in mind when performing Tree Cutting, especially if the tree is high above ground. It is imperative to have the proper equipment and follow the correct procedure to prevent injuries and property damage. This includes using a multi-position ladder, safety harnesses, and a helmet with protective eyeglasses to protect against falling debris. It is also a good idea to enlist the help of a lookout who can monitor the area and tap you on the shoulder if they see a branch about to fall.

If a tree is to be felled, the first step in the process is to make a notch cut on the side of the trunk that will guide its fall. The notch must be a minimum of four inches wide. Once this is completed, the next step is to create a hinge cut by making another notch on the opposite side of the trunk. This will allow the tree to break apart and fall into sections.

In order to fell a tree correctly, it is vital to be on flat, level terrain. A hilly or sloping ground will cause the tree to lean and can be difficult to determine the direction it will fall in. It is also important to ensure the felling zone is clear of power lines, structures, and other trees in case it falls into them.

A seasoned tree service company will have the equipment to safely remove large limbs from the ground. This can be a safer alternative to felling the tree, as it allows workers to stay on the ground and avoid any potential injuries or property damage. To perform this service, a tree service will climb or use a bucket truck to reach the uppermost branches. The limbs will then be attached to a crane and lowered to the ground.

While it is not uncommon for tree services to cut a tree to its base rather than felling it, this is typically done only if it is in a bad condition or is obstructing a road or building. Felling a tree is the most common method of removal, and it provides more control over the direction a fallen tree will land. This method is also preferred for large trees that are too large to haul off with a crane.

from Sunshine Coast Tree Lopping Caloundra https://ift.tt/WFqf7JO