Reasons For Tree Trimming

Tree Trimming is the routine landscape maintenance that helps trees look their best and live a long life. This type of service removes dead limbs, promotes airflow, reduces disease and insect problems, increases fruit production, maintains safety, improves property views, and allows for proper growth. Professional arborists know the proper techniques and procedures to ensure that your trees are well maintained and healthy.

There are multiple reasons for Tree Trimming, and some of them are more important than others. Some of the most common include:

Boosting a Tree’s Health

Uneven tree growth can cause other damage, apart from making a tree look misshapen and unbalanced. This is because overgrowth and extra branches prevent the tree from getting proper moisture and nutrients. However, this is something that can be easily avoided with timely pruning of the trees in your yard.

Thinning a Crown

The process of thinning a tree involves removing specific live branches to reduce the overall density of the canopy. It is most commonly conducted on mature trees, and it can help increase air circulation throughout the entire tree, and also decrease stress on certain limbs due to gravity, wind, snow, etc.

Removing Broken Branch Stubs

The most basic and important reason to prune is to remove broken or damaged branch stubs. These can often be a tripping or falling hazard, and they can also inhibit the growth of new branches.

To make sure that you are not damaging a tree when you are removing broken branch stubs, you should follow these simple steps:

Find the base of the break, or the point where the stub was formed. This is usually a slight bump or raised area, and you should cut the branch just to this spot. Make a clean, flush cut with a sharp handsaw. This will encourage callus formation and speed up healing, which is essential for preventing water damage and decay.

Avoid leaving stubs that are too long, as they can lead to structural defects and weak points in the tree. Ideally, you should aim to have the stub no longer than the width of your finger. You should also make sure that the stub is not rubbing against or crossing other branches, and you should not remove more than about 25% of the living crown in one go.

The last thing to remember is to use a clinometer when you are pruning your trees. This is a tool that can be purchased or made from a piece of paper. You can find an online clinometer calculator by clicking this link.

When using a clinometer, it is recommended that you stand back away from the tree as much as possible, so you can view the entire canopy of the tree without moving your head. Then, you should hold the paper at arm’s length to measure the angle from your line of sight to the top of the tree. The resulting number should be the exact distance from the ground to the top of the tree, and this will allow you to properly thin the canopy of your tree.

from Sunshine Coast Tree Lopping Caloundra https://ift.tt/cv50x6i